Mastering
Reference notes for masters that translate from headphones to a club system. Numbers are starting points, not rules; the reference is always a released record you trust, played at the same loudness.
What to send to mastering
- A stereo WAV at the session sample rate, 24 bit (or 32 bit float).
- Peaks around minus 6 dBFS, no clipping, and no limiter on the master bus.
- Start and end with a little silence; no fades unless they are part of the track.
- Notes on references and anything that must not change.
Loudness and peaks
- Club techno masters often sit between minus 9 and minus 6 LUFS integrated. Louder costs punch: the kick loses its transient first.
- Keep true peaks at or below minus 1 dBTP so encoded files (MP3, AAC, streaming) do not distort.
- Streaming services turn loud tracks down, so extra loudness buys nothing there.
Translation checks
- Low end in mono below about 120 Hz; check the master in mono.
- Listen on at least three systems: monitors, headphones and a small speaker.
- Compare against references at matched loudness, never louder against quieter.
- Deliver the master as 24 bit WAV for DJ stores, plus a 16 bit, 44.1 kHz version if a distributor asks for it.